What is the difference between brush cutter and line trimmer

However, both of these tools are quite similar but have some differences. In this article, we are going to learn exactly about that. A string trimmer is also known as weed wacker and with this trimmer, you can reach hard to reach places when you have overgrown weeds. It uses monofilament line instead of blades and the line can break easily if not used properly.

They are very lightweight and used for trimming off weeds and grass. Weed Wacker comes in varieties of model, some are cordless battery powered, some use gasoline and some electricity. You will be able to clean weeds from the sidewalks, driveways, fences. And can trim off flower beds. Allowing you to have a clean yard! Some string trimmer models come with a rotating head which allows them to work as an edger. On the other hand, a brush cutter also the same thing but comes with more power.

They are a little heavier than the string trimmer since they come with a blade. You can refuel them once it runs out of fuel, and you will be good to go. They are also the most powerful ones out of the three. However, being powered by combustible fuel, gas string trimmers also give out harmful emissions, causing pollution, and their engines also make a lot of noise.

A Brush Cutter is another tool used for cutting weed and grass on a field. But that is what String Trimmers are also for. So what makes it different from a String Trimmer? The main difference between a Brush Cutter and a String Trimmer is using a blade for the cutting purpose instead of a nylon string.

However, as mentioned earlier, in some cases, you can replace the string of a string trimmer with a weed wacker blade. In terms of design, a brush cutter is more or less the same as a string trimmer.

The primary purpose of a brush cutter is to cut grass that is too dense to be cut by a string. Hence, apart from having a blade instead of a string, they also have more powerful 2-cycle engines to deliver the required horsepower for heavy-duty work.

Since brush cutters are better in terms of performance, they only make sense that they are also more expensive than a string trimmer. Other than that, they are almost the same as a string trimmer. Now, let us look at the different pros and cons of brush cutters and string trimmers.

So far, we have told you everything you need to know about a gas string trimmer and a brush cutter and the differences between them. But now that you are clear of the differences, you must be wondering which one should you buy.

And to help you make that decision, we have included this section in the article. A few factors will play a significant role in your decision, which will be based on your needs and requirements.

Those factors are:. Power Needs: What you need a weed cutter for will decide your power needs. If you want to clear some light weed or grass on your backyard or clear your fence lines or walkways, then an electric string trimmer will work just fine for you.

Not to mention, you will also have the option of replacing the string with a weed wacker blade to do a more solemn task. If, however, you need to cut weed professionally or work on dense grass and scrub, then you should go for a brush cutter.

Budget: Budget is another factor that will affect your decision. As mentioned above, brush cutters are more expensive as compared to string trimmers. So, if you are tight on budget, you should consider going for a string trimmer.

Physical Capabilities: Since brush cutters are more powerful, they also tend to be heavier and produce more vibrations and kickback when used. If you think you would not handle that, string trimmers, with lighter weight and fewer vibrations would be a better choice for you. Your email address will not be published. Save my name, email, and website in this browser for the next time I comment. Share Tweet. Contents 1 What Are String Trimmers? Up to MPH Both units offer a 'state of charge' indicator which shows your battery charge level.

For heavy-duty applications such as thick, long grass or dense weeds, a solid blade is better because flexible line will wear out quickly and can also get tangled, stopping the motor. For simply trimming edges, they are both as good as each other. Often featuring a bent shaft, these are lighter in weight and usually less expensive than brush cutters. The hub at the end of the shaft contains nylon lines that cut through grass and weeds as they are spun at high speed.

Line trimmers can be powered by petrol engines, mains electricity or batteries and are usually intended for lighter duty than brush cutters. The torque is transmitted to a hub on which the blade spins parallel with the ground. Brush cutters usually have a solid X or Y shaped blade instead of nylon cord as used on line trimmers. This packs a more powerful punch and lasts longer in heavy-duty applications. A range of factors influence what power option will be best for you, including operating volume, portability and versatility.

Powered by either a two-stroke or four-stroke motor, petrol line trimmers and brush cutters offer the widest range of options. From dual-handle units that are used with a harness to split-shaft designs compatible with different accessories, petrol trimmers come with either a straight or bent shaft. If you can get away with running an extension cord, then electric line trimmers can provide you with similar power to a petrol engine with lightweight and maintenance-free operation.

Light-duty units often have the motor mounted at the cutting end of the shaft, while more powerful trimmers have a motor mounted at operator height and feature a bent shaft.

With advances in technology, cordless line trimmers and brush cutters are rapidly growing in popularity. Available with both bent and straight shafts, they offer the best of both worlds with quiet operation and cordless portability.